NEW Genuine Konica KM1024 MNB 14PL Printhead

NEW Genuine Konica KM1024 MNB 14PL Printhead

The Konica Minolta KM1024 MN print head is a robust, shear mode, piezo on-demand print head that is usable in both binary and 8 level greyscale mode, providing variable drop size and higher print quality without the use of additional print heads.

The Konica Minolta KM1024 MN print head is a vast improvement over the KM512 print head series, offering twice the print width and double the level of greyscale. Konica Minolta piezo on-demand inkjet heads are driven using lower voltages than other inkjet heads and the new actuator used in the KM1024 reduces power consumption even further. The Konica Minolta KM1024 MN print head has 1024 nozzles with a droplet size of 14 pico litre and a native resolution of 360 dpi. The print head is compatible with oil based and solvent inks. This print head is also known as the Konica Minolta KM1024 MNB. This is Konica original print head and it includes the Head ID and the necessary waveform information. It carries a product warranty.

Specifications

Technology: On-Demand Piezo Electric (Shared Wall 3 Cycle)
Native Resolution: 360 dpi
Cal. Droplet Size: 14 pico litre
Max. Drops in Greyscale: 8 drops
Tot. Amount of Nozzles: 1024 (512 nozzles per line)
Nozzle Spacing: 70.5 microns
Print Width: 72 mm
Firing Frequency: 12.8 kHz
Ink Compatibility: Oil Based and Solvent Inks
Heater: not integrated

Agfa : Anapurna M1600, Anapurna M², Anapurna M2050, Anapurna M2540 FB
Allwin : C8
DGI : VE-3206
Dilli : Neo Titan FB2513-06DW, Neo Titan UVT-1604D

1.100% original and new made in Japan
2. Konica Minolta KM1024MNB solvent 14pl head
3.Compatible Printer

Agfa: Anapurna M1600, Anapurna M⊃2;, Anapurna M2050, Anapurna M2540 FB
Allwin: C8,
DGI: VE-3206
Dilli: Neo Titan FB2513-06DW, Neo Titan UVT-1604D